Jergens Ball Lock® Back Mount Receiver Bushing, Shank Diameter (mm): 35
Jergens Ball Lock® Back Mount Receiver Bushing, Shank Diameter (mm): 35
SKU: 49514
Brand: Jergens
Ball Lock® Back Mount Receiver Bushing
$63.55
Additional Information
- Shank Diameter (mm): 35
- Outside Diameter A (inch): 1.8764
- Depth B (inch): 0.493
- Counter Bore C (inch): 2.155
- Minimum Subplate Thickness D (inch): 1-5/16
- Material: 4340 Steel
- Finish: Black Oxide
- Heat Treat: 50-54 RC
- Operating Temperature Range: -20°F to 400°F (-30°C to 200°C)
Jergens Ball Lock® Back Mount Receiver Bushings are used in through hole applications (Light Press Fit). Installed bushings should be approximately 0.012" (0.3mm) below subplate surface. To alleviate the possibility of binding the shank in the bore, the maximum interference fit between bore and bushing O.D. should not exceed 0.0005" (0.013mm).
Related products
What people say