Jergens Stainless Steel Spring Plunger, Thread Size A: 3/4-10, Initial Force (lb): 5.5, Final Force (lb): 14.5
Jergens Stainless Steel Spring Plunger, Thread Size A: 3/4-10, Initial Force (lb): 5.5, Final Force (lb): 14.5
SKU: 27345
Brand: Jergens
Stainless Steel Spring Plunger
$22.70
Additional Information
- Thread Size A: 3/4-10
- Initial Force (lb): 5.5
- Final Force (lb): 14.5
- B (inch): 1-3/4
- C (inch): 3/8
- D (inch): 0.374
- Hex Size E: 3/8
- Locking Element: Yes
- Body Material: 303 Stainless Steel
- Tip Material: 303 Stainless Steel
- Spring: 17-7 PH Stainless Steel
- Thread: 2A-UNC
- Plunger tips are color-coded to indicate light or heavy force:
- Silver: Steel Tip = Light Force
- Black: Steel Tip = Heavy Force
- Single-unit construction for better reliability
- No set screw to separate from the plunger body
- No need for “easy-out” tools
- Close tolerance between tip and body
- Conforms to TCMA dimensional standards
- Patch-style locking element
- Hex drive in the rear for spring plunger insertion
- Special materials and sizes available upon requests
Jergens Spring Plungers, unlike conventional spring plungers, are machined in one piece. The spring is assembled from the top so that there is no need for a set screw. Our Spring Plungers do not have a set screw that can loosen or separate from the plunger body. The advantage is no lost springs and no need for “easy-out” tools. When adjusting Solid Drive, you can be sure the plunger body is turning and not a set screw. For easy insertion of Spring Plungers with locking elements, the tapped hole should be countersunk at least 0.030-0.045" (0.76mm-1.14mm) larger than the major diameter of the plunger.
What people say