Subtotal: $50.48
Carr Lane Diamond Pin, 7/16 Inch Head Diamater, Loose Fit
Carr Lane Diamond Pin, 7/16 Inch Head Diamater, Loose Fit
SKU: CL-4-DPZ
Brand: Carr Lane
Diamond Pin
$7.40
Additional Information
- A HEAD DIA NOMINAL (inch): 7/16
- A HEAD DIA ACTUAL (inch): .4345 / .4342
- B SHANK DIA NOMINAL (inch): 3/8
- B SHANK DIA ACTUAL (inch): .3753 / .3751
- C (inch): 19/32
- D (inch): 0.248
- E (inch): 5/32
- F (inch): 1-1/4
- Material: 1144 Steel
- Heat Treated Rc 50-55
- Finish: Black Oxide
- DFARS Compliant
- RoHS Compliant
- A series of locating pins can take the place of a locating plug. The pins are positioned at three points, 120 degrees apart, around the internal diameter of the hole. This arrangement is usually much more economical than making a custom plug.
- Foolproofing prevents improper loading of a workpiece. The problem is most prevalent with parts that are symmetrical or located concentrically. The simplest way to foolproof a workholder is to position one or two pins in a location that ensures correct orientation.
Diamond pins are precision locating pins that have a chamfered tip for easy part loading, and a shoulder to resist downward forces. These locating pins have important advantages over standard dowel pins. One Round Pin and one Diamond Pin are often used together to locate from two mounting holes in a workpiece, or to align two pieces of a fixture, without binding.
These heat-treated steel diamond pins are relieved, to locate only in 1 axis. Head and shank diameters are concentric to within .0005" TIR.
Carr Lane Mfg. diamond pins are available with head diameters from 1/4 to 1" (6 to 20mm in metric). Made in USA.
What people say