Carr Lane Round Pin, 3/8 Inch Head Diameter
Carr Lane Round Pin, 3/8 Inch Head Diameter
SKU: CL-3-RP
Brand: Carr Lane
Round Pin
$4.68
Additional Information
- A HEAD DIA NOMINAL (inch): 3/8
- A HEAD DIA ACTUAL (inch): .3745 / .3742
- B SHANK DIA NOMINAL (inch): 5/16
- B SHANK DIA ACTUAL (inch): .3128 / .3126
- C (inch): 1/2
- D (inch): 1/8
- E (inch): 1
- Material: 1144 Steel
- Heat Treated Rc 50-55
- Finish: Black Oxide
- DFARS Compliant
- RoHS Compliant
- A series of locating pins can take the place of a locating plug. The pins are positioned at three points, 120 degrees apart, around the internal diameter of the hole. This arrangement is usually much more economical than making a custom plug.
- Foolproofing prevents improper loading of a workpiece. The problem is most prevalent with parts that are symmetrical or located concentrically. The simplest way to foolproof a workholder is to position one or two pins in a location that ensures correct orientation.
Round locating pins are precision engineered with a chamfered tip for easy part loading, and a shoulder to resist downward forces – important advantages over standard dowel pins. One Round locating Pin and one Diamond Pin are often used together to locate from two machined holes in a workpiece, or to align two pieces of a fixture, without binding. Round Locating Pins are also extremely useful as side locators. Head and shank diameters on round locating pins are concentric to within .0005" TIR. Available with head diameters from 1/4 to 1" (6 to 20mm in metric). Carr Lane round locating pins are proudly made in USA.
What people say