Press Fit Slotted Locator Bushings 24308

Air-Feed-Drill Bushings – Standard (24000 Series). These bushing assemblies are designed for use with air-feed drills, tappers, and back-spotfacers. Adaptor-Tip Assemblies consist of two pieces: a locking collar and a pressed-in shank. The collar screws into the air-feed drill's nosepiece, precisely aligns the shank, and locks the drill in place when rotated 30° counterclockwise after insertion in the liner. Shanks and collars can be ordered separately. The 24000-series bushings shown here have 1-1/2"-12 mounting threads. This series is available in seven OD sizes to fit drill diameters from.3125" to.9375". Preferred sizes can be mounted by any method, including the use of Lock Liners, while other sizes have limited mounting options. 5/8" OD. 3/4" OD. 7/8" OD. 1" OD. 1-1/8" OD (Preferred size). 1-1/4" OD. 1-1/2" OD (Preferred size). To order a specific standard bushing, select the basic part number below and add the desired ID drill size (as a 4-place decimal inch) on the Price & Availability screen. See Technical Information tab for Standard Drill Sizes. Standard prices apply only to bushings with a standard inch, number, letter, or metric ID size within the stated range. Example standard bushings: A-24606-.5000 Adaptor-Tip Assembly, 1/2" ID. 24606-.5000 Shank only, 1/2" ID. 24000 Collar only. Accessories: Lock Liner; PART NO. / SHANK OD / MATCHING ADAPTOR-TIP ASSEMBLY; - / 5/8 / -; - / 3/4 / -; - / 7/8 / -; - / 1 / -; A-16525 / 1-1/8 / A-24615; - / 1-1/4 / -; A-16526 / 1-1/2 / A-24815; Taper-Lok Lock Liner; PART NO. / SHANK OD / MATCHING ADAPTOR-TIP ASSEMBLY; - / 5/8 / -; - / 3/4 / -; - / 7/8 / -; - / 1 / -; TLL-16525 / 1-1/8 / A-16505; - / 1-1/4 / -; TLL-16526 / 1-1/2 / A-16506; Lock Nut; PART NO. / SHANK OD; - / 5/8; - / 3/4; - / 7/8; - / 1; 14446 / 1-1/8; - / 1-1/4; 14447 / 1-1/2; Liner; PART NO. / SHANK OD; 19947 / 5/8; 19949 / 3/4; 19950 / 7/8; 19951 / 1; 19946 / 1-1/8; 19952 / 1-1/4; - /. ID Tolerance: Standard ID Tolerance: From #70 to 1/4" +.0001/+.0004 Over 1/4 to 3/4" +.0001/+.0005 Over 3/4 to 1-1/2" +.0002/+.0006 Reamer ID Tolerance (Special): From #70 to 1/4" +.0005/+.0008 Over 1/4 to 3/4" +.0006/+.0010 Over 3/4 to 1-1/2" +.0008/+.0012 Reamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add "-REAMER" to the part number: A-24606-.5000-REAMER (Special). Optional Contour Nose: Angular nose on shank is ideal for drilling on sloped or curved surfaces. Available on standard and coolant-type shanks. Add "-C" suffix to part number: A-24606-.5000-C Adaptor-tip assembly with contour nose, 1/2" ID 24606-.5000-C Shank only, with contour nose, 1/2" ID 24000 Collar only (standard, no suffix). Material: Other materials are available by special order; MATERIAL / HEAT TREAT / FINISH / DFARS / RoHS; 1144 Stressproof Steel / heat treated to achieve Rc 62-64 ID hardness / - / ✔ / ✔.