UDB-755750 Series UDB-755798

Single Flute Tapered Reamer — The ‘Taper Scraper’ Taper Lock holes drilled in sandwiched materials and checked with UNITED Taper Hole Gauges may be slightly irregular in shape, size or finish. The Single Flute Taper Reamer is used to correct those This Reamer removes irregularities and leaves a fine hole finish. Continue to check the hole with a UNITED Taper Hole Gauge and if found to be accurate, proceed with the installation of the fastener. The Single Flute Taper Reamer is best used with a T-Handle. Designed to remove only a few thousandths of material. These tools should not be used where an actual hole enlargement is needed. UNITED provides a re-sharpening service for these critical reamers.