Hold and Install UDB-521426

It is faster to install and eliminates any problem which may arise in removing the lower knurled The Ball Lock Shelox® Index Spool is ideal for duplicating any part or master with a blind hole. It is used to duplicate large Master Plaster Patterns when the hole is blind or the reverse side is hard to reach. After locating and scribing your slope direction on your Master Plaster with UNITED's Slope Indicator, proceed with installations in the following steps: 1. Be sure you Shelox® Liners are clean. Do not mar the top surface of the Shelox® Liner. 2. Slip the Spool into Shelox® Bushing. Keep the Locking Ramps down. 3. Insert the bolt or ball lock pin through the Spool and C-Washer. 4. Thread the knurled nut finger tight or insert the ball lock pin to lock position. 5. Visually check to insure that the Spool is seated flush on the surface of the Liner and the bushing is faired at the low point of the slope. 7. Proceed to next Liner and repeat the preceding instructions. 8. When all the Shelox® Liners are in position, laminate around Shelox® and allow to cure. 9. Remove all Lock Pins, bolts, nuts, C-Washer, and Spools. Clean and return the Index 10. Remove the drill bar from the Maste