Swivel-Adjustable-Universal UCC-268002-198-221

Nurlock drill bushings are designed for permanent installation in jigs, fixtures, and tooling, particularly in plastic tooling applications. The diamond knurled exterior provides superior holding strength and helps resist both rotational and axial movement after installation. Manufactured in-house, our bushings are available in custom inside diameters, outside diameters, groove configurations, and lengths to meet application requirements. Nurlock - N ID Range: #55 to 1-1/32" (0.0520"–1.0312") OD Range: 13/64" to 1-3/8" (0.2180"–1.3850") Length Range: 1/4"to 3" Grooves per Length: 1/4" to 1/2" (1 Groove), 3/4" to 1-1/2" (2 Grooves), 1-3/4" to 3" (3 Grooves) Available in ANSI standard sizing To place a custom order, please complete our order form or contact us directly to discuss your dimensional requirements. High strength — Swivels in all directions — Adjustments can be made for alignment location clamping — 3/8" chip clearance below Helical Nurlock Liner — Use on irregular surfaces, corners and difficult locations — Control perpendicularity — All alloy heat treated steel fixture Simply locate with pin or Nurlock shank — Align — Lock up swivel — Clamp to work piece — Insert appropriate Nurlock Adapter tip, collars and shanks Tips. Fixtures are manufactured to close tolerances with strong heat treated black oxide finish and clear identification on each drill bar. Will hold Positive Feed Motors. UNITED Kits are available with fixtures and swivels for each size Nurlock Collar and Adapter Tip. 25000 Series are available on special request. Swivels in all directions — Location, Alignment, Clamping and Angular Adjustments — Excellent for contoured or irregular surfaces — Adjustable for alignment or clamping from both ends — 3/8" chip clearance below Helical Nurlock Liner — Attractive aluminum blue hard anodized finish and alloy steel Swivel — Black oxide Liners and Clamps Adjust height and width by leveling screw pads in four locations — Adjust 1-7/8'' to 3-3/8'' — Clamp and adjust verticall