Plain & Shoulder Eye Bolts UDB-702011

š Always apply Eye Bolt loads in the plane of the eye › Seat Shoulder Eye Bolts firmly against material part. œ Do not exceed safe working load of rated capacity.  Fit all Eye Bolts firmly and tightly in the hole and check them. ž Do not paint or coat Eye Bolts. Inspection is difficult. Ÿ Engage full thread to obtain capacity rating. Add one half turn to align plane of Eye Bolt. THE ACTUAL LOAD A SINGLE EYE BOLT CAN LIFT IS REFERRED TO AS "RIGGERS LOAD." ENGINEERS CAPACITY IS THE ALLOWABLE TENSION IN THE EYE OF THE LIFTING RIG AS IT IS APPLIED TO THE EYE BOLT. IT IS NECESSARY TO DETERMINE THE TENSION IN EACH RIG GRAIN SIZE: 5 OR FINER TENSILE: 65,000 PSI MIN BENT TEST: NO VISIBLE RUPTURES IN UNTHREADED SECTION WHEN BENT TO