0.281 x 0.0781 Inch Fixtures — RWP-031SS

Description Instructions & Guidelines Key Dimensions Technical Files Related Products This fixture has our smallest dovetail, and is designed for micro machining. Connects directly to the following 0.75″ dovetail fixtures: RWP-002, RWP-002SS, RWP-015, RWP-023, RWP-024 & Rwp-024SS. This allows you to quickly machine smaller size parts without taking your primary fixtures off of the machine. This fixture replaces the discontinued RWP-010SS. Raptor Dovetail Fixtures are made to hold your part on four and five-axis CNC machines. The fixtures provide rigid clamping while exposing five faces of the workpiece. Most features can be completed in a single operation. Our unique Raptor Dovetail spring-loaded clamps require only 1/8″ of material to hold the workpiece. That means less waste, easier prep and no distortion. You prepare all your parts with a single dovetail and utilize the same fixture for every part. Easy, strong and efficient. See Key Dimension Drawing for details. Patented Design. Patent US8,672,310 B2 HAVE AN EDM APPLICATION? USE RAPTOR’S STAINLESS STEEL DOVETAIL FIXTURES Our stainless steel fixtures and clamps are made from 17-4 stainless steel; Heat Treat: H-1150 / Rockwell Hardness Approximate 28. ONE-STEP SETUP Switch from a standard application to an EDM application in a single step: Simply substitute the clamping system socket head cap screws from alloy steel to stainless steel. Fixtures must be bolted down firmly to your Pallet or Table using the screws provided. Do not alter or replace any screw, spring or clamp with anything other than the exact item provided. Clamps must be tightened between 30 and 40 inch pounds of torque. DO NOT EXCEED 40 Inch Pounds. While for most applications tightening can be accomplished simply by using the T-Handle wrench provided, it is always recommended that a torqu