Drill for Installation of UTLD-2040A-1-07

Taper Lock for drilling Aluminum and Soft Materials SEQUENCE FOR USING ONE SHOT POSITIVE FEED EQUIPMENT AND STEP 1. DRILL/COUNTERSINK: Select proper tools from ‘Taper Lock STEP 2. BEARING/PROBE: Use UDB 756072 Series. See ‘Bearing STEP 3. COUNTERSINK DIAMETER CHECK: For normal surfaces, use Uni-Lock Countersink Gage, and for normal or inclined surfaces, use UDB 756340 Series. See ‘Gage Selection’ chart for appropriate ‘Taper Lock STEP 4. PROTRUSION CHECK: For TL100 Series, use UDB 755624 Series for inclined surfaces or values listed in ‘Protrusion Gage’ section. STEP 5. TAPER SCRAPE HOLE: If necessary, use UDB 755758 Series. See ‘Re-Work of Straight Holes’ for appropriate Taper Scraper. Protrusion and bearing check must be made after this operation For TL100 and TL300 angle head flush Taper Locks. Used with Positive Feed Drill Units, Drivematic